Select your language

Reinforcing sleeve & tube cutter for pneumatiques tubes

Reinforcing sleeves are also called bushes and allow the use of compression fittings on MANURIL® and MANUlan® tubes.
This type of fitting is recommended in place of quick-connect fittings in the presence of severe working conditions or where safety or applicable standards impose them.
They are systematically used for road vehicle braking systems.
Reinforcing sleeves are usually made in brass.
On request, they can also be supplied in stainless steel or aluminium.

inserts de renforcement pour tubes pneumatiques inserts de renforcement pour tubes pneumatiques
Reinforcing sleeves (bushes)
Part n° Outer
diameter
(mm)
D
Tolerance
on outer diameter
Inner
diameter
(mm)
I
Tolerance
on inner
diameter
Thickness
(mm)
E
Collar
diameter
(mm)
C
Tolerance
on collar diameter
Length
(mm)
L
Tolerance
on length
43700101 1,5 +/-0,03 1 +/-0,10 0,25 2,5 +/-0,20 8 +/-0,12
43700201 2 +/-0,03 1,4 +/-0,10 0,3 3,2 +/-0,20 8 +/-0,12
43700401 2,5 +/-0,05 1,9 +/-0,10 0,3 4 +/-0,20 8 +/-0,12
43700431 2,7 +/-0,05 2,1 +/-0,10 0,3 4,2 +/-0,20 10 +/-0,12
43701171 3 +/-0,07 2,4 +/-0,10 0,3 4,5 +/-0,20 10 +/-0,12
43702001 4 +/-0,07 3,2 +/-0,10 0,4 6 +/-0,30 10 +/-0,15
43703001 4,5 +/-0,07 3,7 +/-0,10 0,4 6,6 +/-0,30 10 +/-0,15
43704001 5 +/-0,07 4,1 +/-0,10 0,45 6 +/-0,30 12 +/-0,15
43705001 5,5 +/-0,07 4,5 +/-0,10 0,5 8,1 +/-0,30 12 +/-0,15
43703801 6 +/-0,1 5,14 +/-0,10 0,43 8 +/-0,30 15 +/-0,15
43703411 7,5 +/-0,1 6,5 +/-0,10 0,5 10 +/-0,30 15 +/-0,18
43704801 8 +/-0,1 7 +/-0,10 0,5 10 +/-0,30 15 +/-0,18
43707097 8,5 +/-0,1 7,7 +/-0,10 0,4 11 +/-0,30 15 +/-0,18
43705051 9 +/-0,1 7,7 +/-0,10 0,65 12 +/-0,30 15 +/-0,18
43705201 10 +/-0,1 8,7 +/-0,10 0,65 12 +/-0,30 15 +/-0,18
43700141 11 +/-0,02 10 +/-0,10 0,5 14 +/-0,30 15 +/-0,20
43700191 12 +/-0,02 10,7 +/-0,10 0,65 14 +/-0,30 15 +/-0,20
43705221 14 +/-0,02 12,7 +/-0,10 0,65 17,8 +/-0,30 18 +/-0,20
43705241 18 +/-0,02 16,7 +/-0,10 0,65 21,8 +/-0,30 20 +/-0,20
Pince de coupe tubes pneumatiques

The plastic tube cutter 28908631R is intended for cutting pneumatic tubes up to outer diameter 25 mm.
The blade is not disassembled.

Pince de coupe metallique tubes pneumatiques

The metallic Ref 28908631 is intended for cutting pneumatic tubes up to outer diameter 25 mm.
The reference of the spare blade is 20103021B (sold separately).

Technical tubes & accessories

certication AEO
Logo NF 377
Certifications DREAL
Certification Veritas
Certificat BV marine 2021
Rubber hoses
hydraulic hoses
hydraulic fittings
tubes pneumatiques
Sunday, October 02, 2022
Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Read more
Unknown
Unknown
Accept
Decline
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline