Hydraulic Flanges and components

- ISO 6162-1 and 2 /SAE rectangular flanges
- CETOP ou SID./ ISO 6164 square flanges

BRIDE 994 raccord hydraulique

Principe :
This is based on inserting a compressible seal between 2 faces arranged parallel to one another, and tightly held, pressing against one another be means of bolted flanges.
The seal is exactly centred by means of a circular groove in which it is housed.
For union assembly flanges, the two faces will be flanged head end (one with a seal, the other without).
For port assembly flanges, the two faces will be on one hand the flanged head en holding the seal, and on the other the external part of the hydraulic appliance to be seal (motor, pump, jack etc...)

Advantages of using S.A.E. flanges:
- Connection capacity of tubes up to 5" external diameter (ISO 6162-1, SAE J518 code).
- For tightening the screws, slightly lower tightening torques compared with the equivalent connection threads are required.
- Low tightening torques also mean using small flat wrenches, ensuring better performance where the installation space is tight.
- Application up to 420 bars (6000 PSI) for flange sizes 1/2" to 2" (ISO 6162-2, SAE J518 code 62).
- Just one sealing point between fitting the tube/ pipe to the flanged joint.
- Easy to remove thanks to the use of split flange clamps.


- Rectangular flanges one piece or two part : Wrought steel S 355** ( E 36-3 / St 52-3 ) on request stainless steel AISI 316
- Square flanges CETOP and Sid. :  S 355** steel on request stainless steel 304L ( 1.4306 ) or 316L ( 1.4306 )
- ISO / SAE Blocks : C35/C45 steel ( XC38/48 – CK35/45 ) on request stainless steel 304L ( 1.4306 ) or 316L ( 1.4306 )
- Flanged head to be welded : S 235** steel ( E24 / St 37 ) on request stainless steel 304L ( 1.4306 ) or 316L ( 1.4306 )
- Standard 0"Rings : Perbunan / Viton* 90 Shore A
- Flange plugs and Threaded flanged head : S 235** steel ( E24 / St 37 ) on request stainless steel 304L ( 1.4306 ) or 316L ( 1.4306 )
- Métric / UNC CHC bolts : Class 12.9 quenched steel
- Nuts : Class 10 quenched steel

Rectangular flanges - SAE 3000 / SAE 6000


Square flanges - PN 250/ PN 400

Square flanges

Accessories for flanges

Flanged Head

logo tecalemit flexibles

Innovative and present for many years throughout all industries, proposed by an exclusive network of distributors,
Tecalemit Flexibles remains a guarantee of quality and offers a wide range of hydraulic and pneumatic connectors

Our solutions :

Manufacture of industrial hoses

Manufacture of hydraulic hoses

Pneumatic Tube Extrusion

Manufacture of thermoplastic preforms

Distributor of rubber hoses

Distributor of hydraulic fittings

Technical assistance and advice

Definition of specifications according to needs and specifications

Realization of prototypes, modeling, validation tests

Constitution of industrialization file

Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Read more
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics