Pneumatic tubew FLUOROPOLYMERE FEP - Ethylene propylene fluore

Material : F E P fluoropolymer resin Copolymer of hexafluoropropylene and tetrafluoroethylene.
Colour : natural ( natural color is transparent )
Hardness : 55 Shore D
Service temperature : –190°C to + 200 °C
Burst pressure = 3 x working pressure.
Resistance to chemicals is excellent.
Chemical FEP tubing is inert to most chemicals and solvents, similar to PTFE.
Excellent dielectric properties.
Weathering FEP tubing products are virtually unaffected by weather elements.
Resistance to extreme heat, cold, and UV radiation Non-stick.
Low coefficient of friction.
Negligible moisture absorbtion.
Material food contact . Food Contact comply with FDA : 21 CFR 177.1550

Table of working pressure ratios of fluoropolymer FEP tubes with regards to working temperature
T(°C)	+20°	50°	80°	100°	120°	150°	200¨°
Pression (%)	100%	90%	75%	65%	45%	35%	10%

The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness.

Part N°	Ø OD	Ø ID	Color	Wall thickness	Working pressure 20°C	Lenght	Radius	Tol.Ø OD	Tol.Ø ID	Tol.Wall	Weight (gr/mm)
	mm	mm		mm	bar	Ml	mm	mm	mm	mm	G/Ml
0010801010	4.0	2.0	Transparent	1.0	28	25	20	+/-0.07	+/-0.10	+/-0.05	21
0010805010	6.0	4.0	Transparent	1.0	17	25	40	+/-0.07	+/-0.10	+/-0.05	35
0010810010	8.0	6.0	Transparent	1.0	12	25	65	+/-0.10	+/-0.10	+/-0.05	49
0010815010	10.0	8.0	Transparent	1.0	9	25	100	+/-0.12	+/-0.10	+/-0.05	63
0010820010	12.0	10.	Transparent	1.0	-	25	-	-	-	-	-