Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Pneumatic tubes PTFE TECAFLON®
Sintered polytetrafluoroethylene
General
TECAFLON® tubes are made from white sintered polytetrafluorethylene.
PTFE was discovered at the end of the 1930’s, every year its remarkable properties increase the scope of its applications despite the difficulty of its production.
They are obtained by lubricated calibrated extrusion in piston machines, which explains the limited lengths of tubes that can be obtained.
TECAFLON® tubes are :
- Inert to chemical products.
- Very resistant to temperature.
- Fragile under mechanical efforts and abrasion.
- Provided with an excellent slipping coefficient.
- Insensitive to ultra violets.
- Nonflammable.
TECAFLON® tubes are intended for the most severe uses acceptable by thermoplastics with regards to temperature and chemical aggression.
Their admissible working temperature ranges from -170°C to +200°C. they are also of food quality and have the American FDA (Food & Drug Administration) approval. TECAFLON® tubes are rigorously calibrated, although production tolerances on thicknesses are larger than for other tubes.
The following table gives a rapid comparison between ptfe and other high performance fluoride plastic materials such as FEP (fluroethylenepropylene) and PFA (perfluoroalkoxy) whose extrusion is easier.
Tto resume, fep has mechanical, chemical and electrical properties practically identical to those of ptfe, even though its resistance to temperature is limited and pfa has dielectric, thermal and chemical properties identical to PTFE.
TECAFLON® tubes are supplied without markings.
Admissible working temperatures of TECAFLON® tubes are comprised between -170°C and +200°C.
TECAFLON® tubes are produced in limited lengths (see table of characteristics) and then packaged in standard lengths of 25 metres.
On request, they can be supplied otherwise.
Part N°
Calibrated polytetrafluoroethylene tube
| Part N° | Outer diameter (mm) |
Inner diameter (mm) |
Wall thickness (mm) |
Limit of non-burst pressure 20°c (bars) |
Working pressure 20°c (bars) |
Weight (gr/mm) |
Bend radius (mm) |
Maximum out-of-round | Maximum production length | Available |
| 00113800000 | 3 | 1,5 | 0,75 | 60 | 20 | 11,5 | 12 | 0,10 | 95 | On request |
| 00112100000 | 4 | 2 | 1 | 60 | 20 | 20 | 16 | 0,15 | 86 | White/25m |
| 00114100000 | 5 | 3 | 1 | 48 | 16 | 27 | 25 | 0,15 | 60 | On request |
| 00112000000 | 6 | 3 | 1,5 | 60 | 20 | 46 | 24 | 0,17 | 49 | On request |
| 00112200000 | 6 | 4 | 1 | 40 | 13 | 34 | 36 | 0,15 | 500 | White/25m |
| 00112800000 | 8 | 4 | 2 | 60 | 20 | 81 | 32 | 0,20 | 300 | On request |
| 00112300000 | 8 | 6 | 1 | 30 | 10 | 47 | 64 | 0,15 | 200 | White/25m |
| 00114000000 | 9 | 5 | 1,5 | 30 | 10 | 107 | 105 | 0,17 | 50 | On request |
| 00112400000 | 10 | 8 | 1 | 24 | 8 | 61 | 100 | 0,15 | 100 | White/25m |
| 00112500000 | 12 | 10 | 1 | 20 | 7 | 74 | 145 | 0,15 | 84 | White/25m |
| 00112600000 | 14 | 12 | 1,5 | 17 | 6 | 88 | 200 | 0,17 | 75 | On request |
| 00112700000 | 16 | 14 | 1 | 15 | 5 | 102 | 260 | 0,15 | 48 | On request |
| 00114100000 | 18 | 16 | 1 | 13 | 4 | 115 | 330 | 0,15 | 44 | On request |
| 00114200000 | 20 | 18 | 1 | 12 | 4 | 129 | 400 | 0,15 | 38 | On request |
| 00114300000 | 22 | 19 | 1,5 | 16 | 5 | 210 | 330 | 0,17 | 14 | On request |
| 00114400000 | 24 | 21 | 1,5 | 15 | 5 | 230 | 390 | 0,17 | 23 | On request |
| 00114500000 | 26 | 20 | 3 | 28 | 9 | 470 | 225 | 0,20 | 11 | On request |
| 00114600000 | 28 | 25 | 1,5 | 13 | 4 | 271 | 530 | 0,17 | 18 | On request |
PTFE : polytetrafluoroethylene / FEP : fluoroethylenepropylene / PFA : perfluoroalkoxy
Comparatif PTFE / FEP / PFA
Comparatif PTFE / FEP / PFA
| FEATURES | PTFE | FEP | PFA |
| Color | Translucent | Transparent | Translucent |
| Hardness (Shore D) | 58 | 55 | 60 |
| Elongation at 23°C | 250% | 275% | 300% |
| Max Operating Temperature | 260°C | 200°C | 260°C |
| Min Operating Temperature | -268°C | -73°C | -196°C |
| Chemical Resistance | Excellent | Very good | Very good |
| Toxicity | None | None | None |
PTFE: Polytetrafluoroethylene / FEP: Fluoroethylene propylene / PFA: Perfluoroalkoxy
Ratio T°/Pressure
Table of working pressure ratios of TECAFLON® tubes according to working temperature
| T(°C) | +23° | 50° | 100° | 150° | 200° |
| Pressure (%) | 100% | 50% | 35% | 30% | 10% |
The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness.
