Pneumatic tubes MANULENE®
Low density polyethylene tube
MANULENE® tubes are made from solid polyethylene.
They are obtained by calibrated extrusion.
They are used in low pressure pneumatic logic as well as for conveying certain aggresive fluids.
MANULENE® tubes are :
- Very light (density 0.9), impervious and imputrescible.
- Adapted to negative pressure use.
- Very flexible.
- Very smooth inner bore.
- Translucent.
These tubes have very good chemical resistance with regards to many acids, bases and salt solutions (refer to chemical compatibility chart on page 40).
Even so, its mechanical qualities may not be sufficient for certain industrial applications and the working temperature of these tubes only covers a reduced range : between -30°C and +60°C as can be seen in the following table.
Marking of tubes is as follows : “tecalemit flexibles - manulene - part N° - ID x OD - batch N.
Table of working pressure ratios of MANULENE® tubes with regards to working temperature
| T(°C) | -30° to 00° | 20° | 40° | 50° | 60° |
| Pressure (%) | 165% | 100% | 66% | 46% | 40% |
The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness
Calibrated solid polyethylene tube
| Part n° | Outer diameter (mm) | Inner diameter (mm) | Wall thickness (mm) | Pressure limit of non-burst 20°c (bars) | Working pressure 20°c (bars) | Weight (gr/mm) | Bend radius (mm) | Tolerance on outer diameter (mm) | Tolerance on inner diameter (mm) | Available |
| 0010300000 | 4 | 2 | 1 | 58 | 12 | 9 | 10 | +0,10/-0,10 | +0,10/-0,10 | natural |
| 0010310000 | 6 | 4 | 1 | 36 | 7 | 14 | 15 | +0,10/-0,10 | +0,10/-0,10 | natural |
| 0010320020 | 8 | 6 | 1 | 27 | 6 | 20 | 24 | +0,10/-0,10 | +0,10/-0,10 | natural |
| 0010330010 | 10 | 8 | 1 | 23 | 5 | 25 | 40 | +0,10/-0,10 | +0,10/-0,10 | natural |
| 0010340000 | 12 | 10 | 1 | 20 | 4 | 31 | 54 | +0,10/-0,10 | +0,10/-0,10 | natural |
| 0010360000 | 14 | 10 | 2 | 26 | 5 | 68 | 80 | +0,10/-0,10 | +0,10/-0,10 | natural |













Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses