Hydraulic hoses with wire spiral

T 532
Hose for aviation oil

In the field of power transmission by hydraulic oil, T532 can convey Skydrol up to 43 bars.
It can also be used for superheated steam up to 18 bars at 232°C.
It is possible to manufacture the ISO 6134-2B certified hose 533 with an oil-resistant outer cover.
Is structure reinforced by metal spirals gives excellent bend radius.
The EPDM rubber ensures long service life.
It meets ISO 6134-2A standards.

Technical specifications :
Inner tube : black EPDM rubber
Reinforcement : metal spirals
Outer cover : black EPDM rubber
Outer finish : fine tape-wrapped
Temperature : - 40°C to +232°C
Production lengths : 40 metres except dias. 19, 25 and 53 : 60 metres
Colour : black with red lay line
Marking : Tecalemit Flexibles - part N° - NFT 47263 - DN (mm/inch) - batch N°

Part N°	Mod.	Inner diameter		Outer diameter	Wall thickness	Working pressure	Burst pressure	Bend radius	Weight
		mm	Pouce	mm	mm	bar	bar	mm	kg/m
9935313	8	12,7	1/2”	25	6.0	18	180	120	0.6
9935316	10	15,9	5/8”	29	6.5	18	180	160	0.8
9935319	12	19	3/4”	32	6.5	18	180	190	0.9
9935325	16	25,4	1”	38	6.5	18	180	250	1.2
9935332	20	31,8	1” 1/4	46	7.0	18	180	320	1.5
9935338	24	38,1	1” 1/2	54	8.0	18	180	200	1.7
9935350	32	50,8	2”	68	8.5	18	180	500	2.3
9935353		55	2"3/8	71	8.5	18	180	532	2.4
9935363	40	63,5	2”1/2	80	8.0	18	180	630	2.8
9935376	48	76	3”	93	8.5	18	180	750	2.6

+ -

T 911 NF EN 856 4SP - MSHA
Hydraulic hose very high pressure
4 steel wire spirals

Click to collapse

Produced on rigid mandrils from 3/4” up, these hoses are vulcanised in a very long autoclave.
This hose is usually intended for power transmission at high pressures.
It is used in industry, shipping and on earth-moving equipment.
Hoses can be supplied equipped with swaged fittings and test certificates.
It meets the NF EN 856 4SP standard.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

Technical specifications :
Inner tube : black synthetic rubber
Reinforcement : 4 steel wire spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres and variable
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SP - DN (mm/inch) - wp/ps (bars) - batch N°

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9939108	4	6,4	1/4”	14,6	17,9	540	1080	2160	150	0,62
9939308	6	9,5	3/8”	17,5	22,2	501	1002	2004	180	0,85
9939508	8	12,7	1/2”	20,2	25,2	448	896	1792	230	0,95
9939608	10	15,9	5/8”	23,8	28,6	384	769	1538	250	1,14
9939708	12	19,1	3/4”	28,2	32,0	456	911	1823	300	1,48
9939808	16	25,4	1”	35,3	41,0	357	714	1428	340	2,06
9937900	20	31,8	1”1/4	46,0	51,2	305	611	1222	460	3,22
9936900	24	38,1	1”1/2	52,4	58,0	279	559	1118	560	3,74
9936910	32	50,8	2”	65,3	70,4	252	504	1008	660	4,50

+ -

T 912 NF EN 856 4SH - MSHA
Hydraulic hose very high pressure
4 steel wire spirals

Click to collapse

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This hose is usually employed for power transmission at high pressures.
T912 is used in industry, shipping and on earth-moving equipment.
It meets NF EN 856 4SH standards.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Outer cover : oil and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SH - DN (mm/inch) - wp/ps (bars) - batch N°

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9939807	10	15,9	5/8”	23,6	28,4	521	1042	2084	250	1,10
9939809	12	19,1	3/4”	28,4	32,2	456	912	1825	280	1,56
9939810	16	25,4	1”	35,2	38,7	452	903	1807	340	2,09
9939811	20	31,8	1”1/4	41,9	45,5	365	729	1459	460	2,57
9939812	24	38,1	1”1/2	48,8	53,5	361	721	1443	560	3,42
9939813	32	50,8	2”	63,2	68,1	295	589	1179	700	4,73

+ -

T 914 NF EN 856 4SH SUPER ABRA
Hydraulic hose very high pressure
4 steel wire spirals

Click to collapse

Produced on rigid mandrils, these hoses are vulcanised in long length autoclaves.
This highly abrasion resistant hose is normally intended for high pressure delivery.
Thanks to its special synthetic rubber outer cover, it is particularly resistant to abrasion, oils, fuels and atmospheric agents.
T914 is used in industry, shipping and on earth-moving equipment.
It meets NF EN 856 4SH standards.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 4 or 6 metal spirals
Recouvrement : Special synthetic rubber outer cover resistant to abrasion, oils, fuels and atmospheric agents.
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 4SH - ANTI ABRASIF - DN (mm et pouce) - wp/ps (bars) - N°Lot

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9939849	12	19,1	3/4”	28,4	32,2	456	912	1825	280	1,56
9939850	16	25,4	1”	35,2	38,7	452	903	1807	340	2,09
9939851	20	31,8	1”1/4	41,9	45,5	365	729	1459	460	2,57

+ -

T 915 NF EN 856 R15 - MSHA
Hydraulic hose very high pressure
isobaric 420 bars
4 or 6 steel wire spirals

Click to collapse

T915 is among the toughest hydraulic hoses of the range.
I is produced on rigid mandrils and vulcanised in straight lengths.
Its working pressure is 420 bars for all diameters.
Swaging of fittings is carried out after internally and externally skiving the hose.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.
The quality of its neoprene outer cover complies with MSHA (Mine Safety and Health Administration) requirements.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 4 high tensile steel spirals up to 1”, 6 high tensile steel spirals from 1”1/4 up
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +120°C - peaks to 125°C
Production lengths : 61 metres
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 856 R15 - DN (mm/inch) - wp/ps (bars) - batch N°

Part N°	Mod.	Inner diameter		Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	bar	bar	bar	mm	Kg/m
9939002	12	19,1	3/4”	32	420	840	1680	265	1,54
9939003	16	25,4	1”	38,4	420	840	1680	330	2,14
9939004	20	31,7	1”1/4	49,3	420	840	1680	445	3,97
9939005	24	38,1	1”1/2	57,3	420	840	1680	530	4,98
9939006	32	50,8	2"	74	420	840	1680	635	7,32

+ -

T 916 - MSHA
High pressure hose
4 or 6 tensile steel spiral

Click to collapse

The T916 hose is intended for hydraulic systems with high pressure peaks, under severe operating conditions, for mining, offshore, perforation, etc ...
The standard version inner tube is suitable for conveying hydraulic fluids based on mineral, glycol and vegetable oils.
Its MSHA approved coating is resistant to severe abrasion, oils, fuels and atmospheric agents.
The textile folds distribute the pressure forces applied to the inner tube.
The steel wires making up the cables are treated against corrosion.
We crimp various types of tips on this pipe: flanges according to various international standards, line-pipe tips, specific tips depending on request.

Technical specifications :
Inner tube : Synthetic rubber
Reinforcement : 4 (5"18 to 1") or 6 (1"1/4 to 3") very high tensile steel spiral
Outer cover : MSHA resistant synthetic rubber
Outer finish : wrapped
Temperature : -40°C to +100°C - peaks to 125°C
Colour : black

Part N°	Mod.	Inner diameterr		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9939716	10	16	5/8"	23,8	26	350	700	1400	125	0,925
9939816	12	19	3/4"	28,2	31	350	700	1400	140	1,320
9939916	16	25,4	1"	35,1	38,4	350	700	1400	150	1,950
9938904	20	31,8	1"1/4	47,2	50,3	525	1050	2100	420	3,810
9938905	24	38,1	1"1/2	57,8	58,2	475	950	1900	500	5,095
9938906	32	50,8	2"	67,7	71,4	420	840	1680	525	6,330
9938907	40	63,5	2"1/2	82,2	85,7	350	700	1400	800	8,230
9938908	48	76,2	3”	95,7	99,2	210	420	840	900	9,110

Possible end-fittings : Flange, threaded male NPT
Marking : Tecalemit - part n°- MSHA - bar - batch n°

+ -

T 961
Hydraulic hose for very high pressure waterblasting

Click to collapse

Hose types T961 and T962 are mainly intended for very high pressure waterblasting.
For example, they are used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

Technical specifications :
Inner tube : black synthetic rubber
Reinforcement : textile layers, 4 steel spiral layers
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - DN (mm/inch) - batch N°

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9937944	4	6,3	1/4”	14,6	17,6	1000	1250	2500	130	0,595
9938044	6	9,5	3/8”	17,5	21,3	850	1075	2125	155	0,785
9938144	8	12,7	1/2”	20,2	24,6	800	950	1900	200	0,920
9938244	12	19	3/4”	28,2	32	750	925	1850	250	1,930
9938344	16	25,4	1”	35,1	38,4	700	850	1700	300	2,125

+ -

T 962
Hydraulic hose for very high pressure waterblasting

Click to collapse

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9938444	6	9,5	3/8”	18	20,4	1250	1580	3125	210	0,875
9938511	8	12,7	1/2”	21,6	24,6	1100	1375	2750	230	1,215
9938644	12	19	3/4”	29	32	1100	1375	2750	250	1,855

+ -

T 1362
Hydraulic hose for very high pressure waterblasting

Click to collapse

Hose type T1362 is mainly intended for very high pressure waterblasting.
For example, it is used in refineries, sugar mills, paint spray booths in the automotive industry and also for decennial maintenance of engineering works.
Used with water, the safety factor between burst and working pressure is 2.5.
The hose must be internally and externally skived before mounting and swaging of end-fittings.
The metal structure of the hose is then perfectly in cohesion with the metal fitting.

Technical specifications :
Inner tube : black synthetic rubber
Reinforcement : 6 wire spirals
Outer cover : chloroprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - DN (mm/inch) - batch N°

Part N°	Mod.	Inner diameter		Reinforcement outer diameter	Outer diameter	Working pressure	Test pressure	Burst pressure	Bend radius	Weight
		mm	Inch	mm	mm	bar	bar	bar	mm	Kg/m
9938744	6	9,5	3/8”	19,6	24	1450	1820	3625	200	1,135
9938844	8	12,7	1/2”	22,3	29	1450	1820	3625	250	1,420
9938944	12	19	3/4”	30,8	34	1350	1690	3375	300	2,140
9939044	16	25,4	1”	38,1	43	900	1150	2300	350	3,210