Hight pressure rubber hose
![]() |
T916
|
The T916 hose is intended for hydraulic systems with high pressure peaks, under severe operating conditions, for mining, offshore, perforation, etc ...
The standard version inner tube is suitable for conveying hydraulic fluids based on mineral, glycol and vegetable oils.
Its MSHA approved coating is resistant to severe abrasion, oils, fuels and atmospheric agents.
The textile folds distribute the pressure forces applied to the inner tube.
The steel wires making up the cables are treated against corrosion.
We crimp various types of tips on this pipe: flanges according to various international standards, line-pipe tips, specific tips depending on request.
5/8" to 1" |
![]() |
1"1/4 to 3" |
![]() |
Technical specifications :
Inner tube : Synthetic rubber
Reinforcement : 6 very high tensile steel spiral
Outer cover : MSHA resistant synthetic rubber
Outer finish : wrapped
Temperature : -40°C to +100°C - peaks to 125°C
Colour : black
Marking : Tecalemit - part n°- MSHA - bar - batch n°
Part N° | Mod. | Inner diameterr |
Reinforcement outer diameter |
Outer diameter |
Working pressure |
Test pressure |
Burst pressure |
Bend radius |
Weight | |
mm | Inch | mm | mm | bar | bar | bar | mm | Kg/m | ||
9939716 | 10 | 16 | 5/8" | 23,8 | 26 | 350 | 700 | 1400 | 125 | 0,925 |
9939816 | 12 | 19 | 3/4" | 28,2 | 31 | 350 | 700 | 1400 | 140 | 1,320 |
9939916 | 16 | 25,4 | 1" | 35,1 | 38,4 | 350 | 700 | 1400 | 150 | 1,950 |
9938904 | 20 | 31,8 | 1"1/4 | 47,2 | 50,3 | 525 | 1050 | 2100 | 420 | 3,810 |
9938905 | 24 | 38,1 | 1"1/2 | 57,8 | 58,2 | 475 | 950 | 1900 | 500 | 5,095 |
9938906 | 32 | 50,8 | 2" | 67,7 | 71,4 | 420 | 840 | 1680 | 525 | 6,330 |
9938907 | 40 | 63,5 | 2"1/2 | 82,2 | 85,7 | 350 | 700 | 1400 | 800 | 8,230 |
9938908 | 48 | 76,2 | 3” | 95,7 | 99,2 | 210 | 420 | 840 | 900 | 9,110 |
Possible end-fittings : Flange, threaded male NPT